Fault Codes:
Hyundai HX220 NL EPFC 205-0
Solution:
1. Check for open circuits or short circuits in the CD-124(#B)-CN-52(#25) lines 2. Check for open circuits or short circuits in the CD-124(#A)-CN-51(#32) lines 3. Check for open circuits or short circuits in the CD-124(#C)-CN-51(#31) lines
Fault Description:
(When installing the pressure sensor For 10 seconds, the pressure sensor at the end of the boom cylinder measured a voltage greater than 5.2V
Fault Location:
The pressure display at the end of the boom cylinder rod of the monitor is faulty 2. Control function - The floating control of the boom failed
