Fault Codes:Caterpillar General FMI2
Fault Description:
The data is unstable, intermittent or incorrect
Fault Cause:
FMI02 "Unstable, intermittent or incorrect data". Unstable or intermittent data, including all measurement data that change at a rate, must be caused by improper operation of the measurement equipment or connection with the module. Signal data from a component exists at least intermittently. The signal is unstable or invalid. Data can sometimes be correct, but sometimes not. FMI 02 is also used for invalid data, such as the invalid status of parity check switches. Note: This is different from the FMI 10. FMI 02 is used in situations where the rate of change cannot be achieved physically. FMI 10 is used in situations where the rate of change is physically possible but exceeds the predefined limits of a normally operating system.
