Product Description
Built for serious work, this 2022 Hitachi ZX60-5A mini excavator delivers proven 6-ton performance at a fraction of new equipment cost. Sourced directly from Jiangsu, China, this machine represents a smart capital investment for contractors and fleet operators who demand reliability without overpaying. Powered by a Yanmar 4TNV98 water-cooled, 4-cylinder engine producing 42.4 kW at 2,100 RPM, it combines fuel efficiency with consistent digging power across demanding job sites.
- Engine: Yanmar 4TNV98 | 42.4 kW / 2,100 RPM | 236 N·m max torque | 3.318L displacement
- Digging Performance: Bucket force 41.4 kN | Arm force 28.4 kN | Max digging depth 3,850 mm | Max reach 6,250 mm
- Hydraulics: 3 variable axial piston pumps | 2 × 52.5 L/min main flow | 24.5 MPa working circuit
- Mobility: Travel speed 4.5 km/h (high) | Tractive force 38.5 kN | 70% gradeability
- Dimensions: Transport length 6,060 mm | Width 2,060 mm | Operating weight 5,960 kg
- Undercarriage: 400 mm track pads | 1,600 mm gauge | Ground pressure 31 kPa
Low ground pressure, compact tail swing radius of 1,650 mm, and a full cab height of 2,475 mm make this ZX60-5A equally capable in confined urban sites and open excavation work. Maximize your ROI — get professional-grade Hitachi engineering without the new-unit price tag.
| Specifications | Value |
|---|---|
| No. | 1070975 |
| Tonnage (tons) | 6 |
| Working weight (kg) | 5960 |
| Bucket capacity (m³) | 0.24 |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | 4TNV98 |
| Rated power (kw/rpm) | 42.4/2100 |
| Cooling mode | water-cooling |
| Cylinder diameter × stroke (mm) | 98 x 110 |
| Maximum torque (N.m) | 236/1350 |
| Number of cylinders (PCS) | 4 |
| Displacement (L) | 3.318 |
| Working form | 4 stroke, water cooled, direct injection |
| Ground specific pressure (Kpa) | 31 |
| Rotation speed (rpm) | 9.1 |
| Climbing ability (%) | 70% (35°) |
| Bucket digging force (kN) | 41.4 |
| Rod digging force (kN) | 28.4 |
| Maximum tractive force (kN) | 38.5 |
| Travel speed (km/h) | 0-4.5/0-2.5 High/low |
| Turning torque (Nm) | 10 |
| Rotary hydraulic motor type | 1 axial plunger motor |
| Type of walking hydraulic motor | 2 variable axial piston motors |
| Maximum flow of main pump (l/min) | 2 x 52.5 |
| Traveling Hydraulic Circuit (Mpa) | 24.5 |
| Rotary Hydraulic Circuit (Mpa) | 17.6 |
| Main pump type | 3 variable axial piston pumps |
| Working Hydraulic Circuit (Mpa) | 24.5 |
| Pilot Oil Circuit (MPa) | 3.9 |
| Pilot pump flow (L/min) | 9.5 |
| Bucket cylinders - Number × diameter × stroke (mm) | 1 x 80 x 50 |
| Bucket rod cylinders - Number × diameter × stroke (mm) | 1 x 85 x 55 |
| Boom cylinders - Number × diameter × stroke (mm) | 1 x 105 x 60 |
| Fuel Tank (L) | 120 |
| Hydraulic Tank (L) | 60 |
| Engine Oil changes (L) | 12.3 |
| Coolant (L) | 8 |
| Hydraulic System (L) | 93 |
| Total transport length (mm) | 6060 |
| Total transport width (mm) | 2060 |
| Total transport height (mm) | 2085 |
| Full cab height (mm) | 2475 |
| Counterweight ground clearance (mm) | 620 |
| Minimum ground clearance (mm) | 310 |
| Minimum turning radius of front working device (mm) | 2510 |
| Back end turning radius (mm) | 1650 |
| Onboard width (mm) | 2060 |
| Track gauge (mm) | 1600 |
| Track plate width (mm) | 400 |
| Number of sprockets (single side) (each) | 1 |
| Number of wheels (single side) (each) | 5 |
| Number of track plates (single side) (PCS) | 39 |
| Maximum digging radius (mm) | 6250 |
| Maximum digging depth (mm) | 3850 |
| Maximum excavation height (mm) | 5800 |
| Maximum unloading height (mm) | 4080 |
| Maximum vertical digging depth (mm) | 3440 |
| Bulldozer lift or depth (mm) | 430 x 400 |
| Dodging plate width × height (mm) | 2000 x 400 |
| Maximum excavation radius of stop surface (mm) | 6130 |
WhatsApp
Facebook
FAQs
WhatsApp