Product Description
Built for operators who demand precision under load, Hyundai's R215-7 pairs a 110 kW D6BT-C six-cylinder turbocharged direct-injection engine with a dual 220 L/min variable axial piston pump system — delivering consistent hydraulic force across working circuits rated at 280 MPa. Bucket digging force reaches 123.3 kN with rod digging force at 95.1 kN, giving operators confident, controlled bite in dense or compacted material.
At 20,700 kg operating weight, ground pressure holds at just 47 kPa across 600 mm track plates — a wide, stable footprint that resists machine lean on soft ground and graded surfaces. Dual travel speeds of 3.5 and 5.2 km/h, combined with 70% gradeability, support dependable repositioning across demanding terrain without sacrificing control.
Hyundai's operator cab on this generation R215-7 prioritizes wide-angle forward and lateral sightlines — a deliberate design choice that reduces blind spots during swing cycles and sharpens bucket placement accuracy, lowering operator fatigue on long shifts. This unit is currently located in Guangdong, China and available for inspection.
- Max digging depth: 6,800 mm
- Max digging radius: 9,930 mm
- Max excavation height: 9,730 mm
- Rotation speed: 12.5 rpm
- Fuel tank capacity: 320 L
- Engine: Hyundai D6BT-C | 7.0 L displacement | Water-cooled
| Specifications | Value |
|---|---|
| No. | 1061867 |
| Tonnage (tons) | 21 |
| Working weight (kg) | 20700 |
| Bucket capacity (m³) | 0.92 |
| Boom length (mm) | 5650 |
| Rod length (mm) | 2920 |
| Country of origin | Jiangsu (Province) |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Hyundai D6BT-C |
| Rated power (kw/rpm) | 110/1950 |
| Cooling mode | water-cooling |
| Cylinder diameter × stroke (mm) | 118 x 115 |
| Number of cylinders (PCS) | 6 |
| Displacement (L) | 7 |
| Working form | Six-cylinder four-stroke turbocharged direct injection engine |
| Ground specific pressure (Kpa) | 47 |
| Rotation speed (rpm) | 12.5 |
| Climbing ability (%) | 70/35 ° |
| Bucket digging force (kN) | 123.3 |
| Rod digging force (kN) | 95.1 |
| Travel speed (km/h) | 3.5/5.2 |
| Main overflow set pressure (Mpa) | 47 |
| Rotary hydraulic motor type | Quantitative swash plate axial piston motor |
| Type of walking hydraulic motor | Variable swash plate axial piston motor |
| Maximum flow of main pump (l/min) | 2 x 220 |
| Traveling Hydraulic Circuit (Mpa) | 280 |
| Rotary Hydraulic Circuit (Mpa) | 240 |
| Main pump type | 2× variable axial piston pump + gear pump |
| Working Hydraulic Circuit (Mpa) | 280 |
| Pilot Oil Circuit (MPa) | 35 |
| Bucket cylinders - Number × diameter × stroke (mm) | 120 * 80 * 1120 |
| Bucket rod cylinders - Number × diameter × stroke (mm) | 140 * 95 * 1570 |
| Boom cylinders - Number × diameter × stroke (mm) | 125 * 85 * 1320 |
| Fuel Tank (L) | 320 |
| Hydraulic Tank (L) | 165 |
| Engine Oil changes (L) | 16.3 |
| Coolant (L) | 32.7 |
| Hydraulic System (L) | 270 |
| Total transport length (mm) | 9510 |
| Total transport width (mm) | 2800 |
| Total transport height (mm) | 2990 |
| Full cab height (mm) | 2920 |
| Counterweight ground clearance (mm) | 1060 |
| Minimum ground clearance (mm) | 480 |
| Back end turning radius (mm) | 2830 |
| Total track length (mm) | 4160 |
| Track gauge (mm) | 2200 |
| Track plate width (mm) | 600 |
| Total track width (mm) | 2800 |
| Track ground length (mm) | 3360 |
| Maximum digging radius (mm) | 9930 |
| Maximum digging depth (mm) | 6800 |
| Maximum excavation height (mm) | 9730 |
| Maximum unloading height (mm) | 6910 |
| Maximum vertical digging depth (mm) | 6060 |
| Bulldozer lift or depth (mm) | There is no |
| Dodging plate width × height (mm) | There is no |
| Maximum excavation radius of stop surface (mm) | 9760 |
| Maximum effective digging depth (mm) | 6610 |
WhatsApp
Facebook
FAQs
WhatsApp