Product Description
Built for precision and all-day productivity, this 2018 XCMG XE150D delivers 15-ton performance with operator-centered engineering. Powered by a QSF3.8 turbocharged engine producing 93 kW at 2200 rpm, it combines 106.9 kN bucket digging force with refined hydraulic control for responsive handling across demanding job sites. Dual variable piston pumps supply 2 × 123.5 L/min flow, ensuring smooth simultaneous functions and reduced cycle times.
Operators benefit from exceptional visibility across the 8304 mm maximum digging radius, supported by a stable 1990 mm track gauge and low 37 kPa ground pressure for secure footing on soft terrain. The spacious cabin minimizes fatigue during extended shifts, while intuitive controls and 11.7 rpm rotation speed enable confident maneuvering in tight spaces. With 5535 mm digging depth and 6185 mm unloading height, this Xuzhou-manufactured excavator tackles trenching, loading, and grading with consistent reliability.
- Water-cooled 4-cylinder engine: 500 N·m peak torque
- 0.32–0.71 m³ bucket capacity range
- 14,600 kg working weight for balanced stability
- Currently located in Jinhua, Zhejiang
| Specifications | Value |
|---|---|
| No. | 1021944 |
| Tonnage (tons) | 15 |
| Working weight (kg) | 14600 |
| Bucket capacity (m³) | 0.32-0.71 |
| Boom length (mm) | 4600 |
| Rod length (mm) | 2520 |
| Country of origin | Xuzhou |
| power | Traditional power |
| manufacturer | Made in China |
| bucket | backhoe |
| Engine type | QSF3.8 |
| Rated power (kw/rpm) | 93/2200 |
| Cooling mode | water-cooling |
| Maximum torque (N.m) | 500/1300 |
| Number of cylinders (PCS) | 4 |
| Displacement (L) | 3.8 |
| Working form | Turbocharged/air-to-air cooling |
| Ground specific pressure (Kpa) | 37 |
| Rotation speed (rpm) | 11.7 |
| Climbing ability (%) | 35 |
| Bucket digging force (kN) | 106.9 |
| Rod digging force (kN) | 73.4 |
| Maximum tractive force (kN) | 134 |
| Travel speed (km/h) | 5.3/3.2 |
| Main overflow set pressure (Mpa) | 31.4/34.3 |
| Rotary hydraulic motor type | Plunger hydraulic motor |
| Type of walking hydraulic motor | Plunger hydraulic motor |
| Maximum flow of main pump (l/min) | 2 x 123.5 |
| Traveling Hydraulic Circuit (Mpa) | 34.4 |
| Rotary Hydraulic Circuit (Mpa) | 25 |
| Main pump type | Variable piston pump ×2+ gear pump ×1 |
| Pilot Oil Circuit (MPa) | 3.9 |
| Fuel Tank (L) | 260 |
| Hydraulic Tank (L) | 105 |
| Engine Oil changes (L) | 11 |
| Total transport length (mm) | 7795 |
| Total transport width (mm) | 2590 |
| Total transport height (mm) | 2900 |
| Counterweight ground clearance (mm) | 948 |
| Minimum ground clearance (mm) | 477 |
| Minimum turning radius of front working device (mm) | 2335 |
| Back end turning radius (mm) | 2325 |
| Total track length (mm) | 3658 |
| Track gauge (mm) | 1990 |
| Track plate width (mm) | 600 |
| Track ground length (mm) | 2910 |
| Maximum digging radius (mm) | 8304 |
| Maximum digging depth (mm) | 5535 |
| Maximum excavation height (mm) | 8649 |
| Maximum unloading height (mm) | 6185 |
| Maximum vertical digging depth (mm) | 4697 |
| Bulldozer lift or depth (mm) | No bulldozer |
| Dodging plate width × height (mm) | No bulldozer |
WhatsApp
Facebook
