Product Description
Engineered around a Cummins QSB7 6-cylinder, 6.7L turbocharged diesel producing 135 kW at 2,050 rpm, the 2022 XCMG XE215DA delivers calculated force across every operating parameter. Water-cooled, EFI-controlled, and intercooled, its drivetrain is built for sustained output under demanding site conditions — not peak performance on paper.
At 21,900 kg operating weight, hydraulic output drives a bucket digging force of 149 kN and rod digging force of 111 kN, fed by a dual main pump system flowing 2×216 l/min. Maximum tractive force reaches 184 kN across a 600 mm track plate, with ground pressure held to 47.2 kPa — preserving soft-ground access without sacrificing stability.
Reach geometry is precise: 9,940 mm maximum digging radius, 6,680 mm digging depth, and a 9,620 mm excavation height give operators full dimensional control on deep cuts and high-reach placements. A 400 L fuel tank and 220 L hydraulic reservoir support extended shift cycles with minimal interruption.
- Engine: Cummins QSB7 — 135 kW / 2,050 rpm, 6-cylinder, water-cooled
- Bucket digging force: 149 kN | Rod digging force: 111 kN
- Max digging depth: 6,680 mm | Max digging radius: 9,940 mm
- Dual main pump: 2×216 l/min | Tractive force: 184 kN
- Operating weight: 21,900 kg | Ground pressure: 47.2 kPa
- Travel speed: 5.4 / 3.1 km/h | Gradeability: 35%
- Fuel capacity: 400 L | Hydraulic tank: 220 L
| Specifications | Value |
|---|---|
| No. | 1067359 |
| Tonnage (tons) | 21 |
| Working weight (kg) | 21900 |
| Bucket capacity (m³) | 1.05 |
| Boom length (mm) | 5680 |
| Rod length (mm) | 2910 |
| power | Traditional power |
| manufacturer | Made in China |
| bucket | backhoe |
| Engine type | QSB7 |
| Rated power (kw/rpm) | 135/2050 |
| Cooling mode | water-cooling |
| Number of cylinders (PCS) | 6 |
| Displacement (L) | 6.7 |
| Working form | Efi, 4-stroke, turbocharged, air-to-air cold |
| Ground specific pressure (Kpa) | 47.2 |
| Rotation speed (rpm) | 11.8 |
| Climbing ability (%) | 35 |
| Bucket digging force (kN) | 149 |
| Rod digging force (kN) | 111 |
| Maximum tractive force (kN) | 184 |
| Travel speed (km/h) | 5.4/3.1 |
| Maximum flow of main pump (l/min) | 2*216 |
| Fuel Tank (L) | 400 |
| Hydraulic Tank (L) | 220 |
| Engine Oil changes (L) | 19.5 |
| Total transport length (mm) | 9625 |
| Total transport width (mm) | 2990 |
| Total transport height (mm) | 3100 |
| Counterweight ground clearance (mm) | 1050 |
| Minimum ground clearance (mm) | 486 |
| Minimum turning radius of front working device (mm) | 3530 |
| Back end turning radius (mm) | 2844 |
| Total track length (mm) | 4255 |
| Track gauge (mm) | 2390 |
| Track plate width (mm) | 600 |
| Maximum digging radius (mm) | 9940 |
| Maximum digging depth (mm) | 6680 |
| Maximum excavation height (mm) | 9620 |
| Maximum unloading height (mm) | 6780 |
| Maximum vertical digging depth (mm) | 5715 |
WhatsApp
Facebook
FAQs
WhatsApp