Sany

XCMG

Caterpillar

Hitachi

Komatsu

Doosan

Kobelco

Volvo

Hyundai

Sumitomo

Kato

Case

Yanmar

JohnDeere

Liebherr

On site in Sichuan and ready to cut grade, this 2020 Caterpillar 390DL does not need a prep week. Operating weight sits at 90,390 kg across a 3,510 mm track gauge, with 650/750/900 mm shoe options to suit soft clay or rock. A C18 ACERT engine pushes 390 kW into a 995 L hydraulic system, feeding 363 kN of bucket force and 276 kN of stick force — enough to load out rock, trench to 9,660 mm, and swing 4.6 m³ every pass.
<ul>
<li>Maximum digging depth 9,660 mm; vertical wall cut 6,850 mm</li>
<li>Ground-level reach 14,690 mm; dump height 9,270 mm</li>
<li>Ground pressure 88.3–122.4 kPa for stable footing on soft ground</li>
<li>1,240 L fuel tank keeps long shifts running without refueling stops</li>
<li>4.5 km/h travel and 590 kN tractive force for muddy haul roads</li>
<li>14,700 mm transport length, 4,260 mm width, 5,290 mm height for standard lowboy moves</li>
</ul>
Bucket, undercarriage, and hydraulics are matched to production work: mass excavation, trenching, site grading, and structural demolition. Inspect it, load it, and start digging.

This 2012 XCMG XE370CA hydraulic excavator offers reliable performance for heavy earthmoving and construction applications. With approximately 90,000 operating hours recorded, this machine has been actively utilized in demanding work environments. The XE370CA is part of XCMG's large excavator series, designed for high-capacity digging, loading, and material handling operations.

Currently located in Hunan Province, China, this unit represents an economical option for contractors seeking proven XCMG engineering at a competitive price point. The 37-ton class excavator features robust construction suitable for quarrying, infrastructure development, and large-scale site preparation projects.

<ul>
<li>Year of Manufacture: 2012</li>
<li>Manufacturer: XCMG (Xuzhou Construction Machinery Group)</li>
<li>Model: XE370CA</li>
<li>Approximate Hours: 90,000+</li>
<li>Current Location: Hunan, China</li>
</ul>

Inspection and verification recommended prior to purchase. Export assistance available for international buyers.

XCMG XE370CA

This 2019 Caterpillar 330B excavator offers reliable performance with documented low hours. Currently located in Hunan, China, this machine comes with verified original meter readings showing just over 6,000 operating hours—indicating minimal use for its age.

The Cat 330B is engineered for demanding excavation, material handling, and site preparation tasks. Known for its robust hydraulic system and durable undercarriage, this model delivers consistent productivity across construction, mining, and infrastructure projects.

<ul>
<li>Year: 2019</li>
<li>Operating Hours: 6,000+</li>
<li>Location: Hunan, China</li>
<li>Condition: Well-maintained with authentic service records</li>
</ul>

This unit represents solid value for contractors seeking dependable mid-range excavation capacity. Competitive pricing available for serious inquiries. Contact us to discuss specifications, arrange inspection, or request additional documentation.

Caterpillar 330B

This 2020 Hitachi ZX270-3 excavator delivers reliable performance for demanding excavation projects. Operating from our Beijing facility, this well-maintained machine features responsive hydraulic systems and smooth digging action suited for various earthmoving applications.

<ul>
<li>Year: 2020</li>
<li>Model: Hitachi ZX270-3</li>
<li>Electrical systems fully operational</li>
<li>Fast cycle times with controlled digging force</li>
<li>Available for on-site inspection and testing</li>
<li>Location: Beijing, China</li>
</ul>

Comprehensive documentation including detailed photos and operational videos available upon request. The machine has been thoroughly inspected and is ready for immediate deployment. Ideal for contractors seeking a proven mid-size excavator with excellent operational efficiency.

Hitachi ZX270-3

This 2020 Kobelco SK260 excavator represents exceptional value in the used equipment market. Currently located in Beijing, China, this machine showcases the reliability and performance Kobelco is known for in the construction and earthmoving industries.

The excavator is in outstanding condition with all major components operating properly. Hydraulic systems deliver strong, responsive performance with coordinated movements across all functions. The engine, hydraulics, and drivetrain show minimal wear and operate without leaks, indicating proper maintenance throughout its service life.

<ul>
<li>Year: 2020</li>
<li>Make: Kobelco</li>
<li>Model: SK260</li>
<li>Location: Beijing, China</li>
<li>Condition: Excellent mechanical state</li>
<li>Hydraulics: Full power, leak-free operation</li>
</ul>

Ideal for contractors seeking a well-maintained mid-size excavator with proven performance capabilities. Available for inspection by appointment.

Kobelco SK260

This 2022 Sany SY155H excavator represents a relatively recent addition to the pre-owned market, offering buyers access to modern hydraulic technology at competitive value. Manufactured by Sany Heavy Industry, this 15-ton class machine combines operational efficiency with the durability expected from Chinese-manufactured equipment. Currently located in Hunan Province, China, the unit is positioned for cost-effective international shipping or regional deployment.

The SY155H is designed for general construction, earthmoving, and utility applications. Key operational characteristics include:

<ul>
<li>Operating weight approximately 15 metric tons</li>
<li>Standard swing boom and arm configuration</li>
<li>Diesel-powered hydraulic system</li>
<li>Cab-operated controls with standard instrumentation</li>
<li>Compatible with various bucket attachments</li>
</ul>

With limited operating hours since its 2022 manufacture date, this excavator offers buyers an opportunity to acquire near-current generation equipment without new machine premiums. Inspection reports and export documentation can be arranged upon request.

Sany SY155H

This 2022 XCMG XE135D excavator offers reliable performance for medium-duty construction and earthmoving applications. Operating from our Hunan, China facility, this 13.5-ton class machine features XCMG's proven hydraulic system and robust undercarriage designed for demanding job sites. With minimal operating hours since manufacture, the XE135D delivers efficient fuel consumption and responsive controls suitable for trenching, grading, and material handling tasks.

<ul>
<li>Year of Manufacture: 2022</li>
<li>Operating Weight: Approximately 13.5 tons</li>
<li>Engine: Turbocharged diesel, meeting emission standards</li>
<li>Hydraulic System: Load-sensing for precise control</li>
<li>Current Location: Hunan Province, China</li>
<li>Condition: Well-maintained with documented service history</li>
</ul>

Ideal for contractors seeking dependable mid-size excavation equipment. Available for inspection by appointment. Export documentation and logistics support can be arranged.

XCMG XE135D

This 2020 Hitachi EX200 excavator is available from Zhejiang, China, and includes one original factory bucket. The EX200 series is known for reliable hydraulic performance and fuel efficiency in medium-duty excavation applications. This unit represents Hitachi's proven engineering standards with robust construction suitable for earthmoving, site preparation, and general construction projects.

Key features include:
<ul>
<li>Genuine Hitachi factory bucket included</li>
<li>2020 model year with moderate operational hours</li>
<li>20-ton class excavator suitable for various jobsite conditions</li>
<li>Established service network and parts availability</li>
<li>Located in Zhejiang province for convenient inspection</li>
</ul>

The EX200 delivers dependable performance for contractors seeking a mid-sized excavator with Japanese manufacturing quality. Inspection welcome prior to purchase.

Hitachi EX200

Built for high-volume earthmoving and precision excavation, this 2021 Sany SY205C delivers 118 kW of rated power and a 20-ton operating weight designed for demanding job sites. With a maximum digging depth of 6,600 mm and a reach extending to 10,280 mm, this machine handles deep trenching, foundation work, and heavy-duty grading with authority. The backhoe configuration and 0.9-1.1 m³ bucket capacity move material efficiently across construction, demolition, and site preparation projects.

<ul>
<li>138 kN bucket digging force tackles compacted soils and challenging ground conditions</li>
<li>70% gradeability and 440 mm ground clearance ensure mobility on rough terrain</li>
<li>9,600 mm maximum excavation height reaches elevated loading applications</li>
<li>3,730 mm minimum turning radius enables operation in confined spaces</li>
<li>Currently located in Zhejiang, China—available for immediate deployment</li>
</ul>

Equipped with traditional power systems and proven Sany engineering, this SY205C arrives site-ready for contractors requiring reliable performance in excavation, utility installation, and material handling operations. Specifications verify its capability: 109 kN stick force, 2,900 mm rear turning radius, and dual

Sany SY205C

Built for demanding excavation across infrastructure, mining, and civil construction projects, the Sany SY305C delivers 30-ton class performance with the reliability of traditional diesel power. Manufactured in China by one of the industry's most recognized heavy equipment producers, this 2022 backhoe excavator represents a strong balance of digging force, machine stability, and operational efficiency.

From the operator's seat, the spacious cab provides wide-angle visibility across the boom and swing radius, reducing blind spots during trench work and material handling. Ergonomic controls and a well-structured instrument layout keep fatigue low during long production cycles.

<ul>
 <li>30-ton operating weight for superior ground stability on uneven terrain</li>
 <li>Backhoe configuration optimized for deep trench digging and bulk material removal</li>
 <li>Traditional diesel powertrain for straightforward servicing and fuel accessibility in remote job sites</li>
 <li>Reinforced undercarriage designed to handle load stress across varied ground conditions</li>
 <li>2022 build year — low hours relative to age, available from Zhejiang, China</li>
</ul>

Contact Fair Trade Machinery for current availability, inspection reports, and export logistics from Zhejiang, China.

Sany SY305C

This 2017 Komatsu PC300 excavator is currently available in Sichuan, China. The PC300 series is recognized for its reliable hydraulic performance and fuel efficiency in medium to heavy-duty excavation applications. With approximately 7 years of operational history, this unit represents a cost-effective solution for contractors seeking proven Komatsu engineering at an accessible price point.

Key features of the PC300 platform include:
<ul>
<li>Robust undercarriage design for extended component life</li>
<li>Spacious operator cabin with ergonomic controls</li>
<li>Efficient hydraulic system for productive cycle times</li>
<li>Proven Komatsu powertrain technology</li>
</ul>

This excavator is well-suited for earthmoving, site preparation, and general construction projects. Inspection is recommended to verify current operating condition and maintenance history. Contact us for detailed specifications, available documentation, and export assistance to your location.

Komatsu PC300

Discover the reliability and efficiency of the 2020 Doosan DH60-7, available for purchase in Guangdong, China. This used excavator is offered at a competitive price of 36,000 RMB, making it an excellent investment for your construction or excavation projects. The machine is in good condition, backed by comprehensive visual documentation including detailed images and operational videos, ensuring transparency and quality. Ideal for a range of applications, the Doosan DH60-7 combines robust performance with fuel efficiency, providing a cost-effective solution for your heavy machinery needs.
<ul>
<li>Year: 2020</li>
<li>Brand: Doosan</li>
<li>Model: DH60-7</li>
<li>Location: Guangdong, China</li>
<li>Price: 36,000 RMB</li>
<li>Included: Images and Videos</li>
</ul>

Doosan DH60-7

This 2014 Volvo L350F wheel loader offers proven performance for demanding construction and quarry operations. Manufactured by Volvo Construction Equipment, the L350F combines a powerful engine with advanced hydraulics to deliver efficient material handling in heavy-duty applications. Currently located in Sichuan, China, this machine represents a cost-effective solution for contractors seeking reliable productivity.

Key features of the Volvo L350F include:
<ul>
<li>Robust design built for high-capacity loading operations</li>
<li>Operator-focused cab with enhanced visibility and ergonomic controls</li>
<li>Fuel-efficient powertrain reducing operational costs</li>
<li>Proven Volvo drivetrain for durability in challenging environments</li>
<li>Versatile bucket configurations for various material types</li>
</ul>

This used wheel loader is available for inspection in Sichuan. Contact us for current condition details, service records, and competitive pricing on this Volvo L350F.

Volvo L350F

This 2021 Kobelco SK270D-8 excavator represents exceptional value in the used equipment market. Recently arrived from Zhejiang, China, this machine demonstrates the reliability and precision engineering Kobelco is known for in the construction and earthmoving sectors.

Key features include:
<ul>
<li>Low operating hours with well-maintained condition</li>
<li>Hydraulic system, engine, and drivetrain in excellent working order</li>
<li>500-hour warranty coverage available</li>
<li>Flexible financing options to support your project needs</li>
<li>Available for immediate inspection and purchase</li>
</ul>

The SK270D-8 series offers proven performance for medium to heavy-duty applications including excavation, material handling, and site development. This unit is ready for deployment and backed by comprehensive pre-delivery inspection. Contact us to schedule a viewing or discuss logistics for international delivery.

Kobelco SK270D-8

This 2019 Sany SY245H excavator represents solid value in the mid-size crawler excavator segment. Sourced from Fujian, China, this machine demonstrates reliable operational condition with comprehensive documentation including detailed photos and video inspection available upon request.

The SY245H is engineered for demanding applications including earthmoving, foundation work, and general construction projects. Key attributes include:

<ul>
<li>Proven Sany hydraulic system for consistent performance</li>
<li>Mid-size operating weight suitable for diverse job sites</li>
<li>Standard crawler undercarriage configuration</li>
<li>Verified operational status with minimal reported issues</li>
<li>Competitive pricing in the pre-owned equipment market</li>
</ul>

This unit offers international buyers an accessible entry point into quality Chinese manufacturing. Suitable for contractors seeking dependable equipment without premium pricing. Export arrangements and technical specifications available through FairTradeMachinery.

Sany SY245H

This 2015 Sany SY60-9 mini excavator is available from Hunan, China. With over 40,000 operational hours, this machine demonstrates the proven durability of Sany's compact excavator line. The SY60-9 is a 6-ton class machine well-suited for urban construction, landscaping, and utility work where maneuverability in confined spaces is essential.

Key features of the SY60-9 model include:
<ul>
<li>Compact design for tight jobsite access</li>
<li>Reliable hydraulic system for consistent performance</li>
<li>Fuel-efficient operation reducing running costs</li>
<li>Versatile bucket and attachment compatibility</li>
</ul>

This unit has accumulated significant working hours, reflecting its operational history. Prospective buyers should conduct thorough inspections to assess current mechanical condition. The machine represents an economical entry point for contractors seeking dependable compact excavation equipment from an established Chinese manufacturer.

Sany SY60-9

This 2020 Komatsu PC350-8 hydraulic excavator offers proven reliability for demanding earthmoving operations. Sourced from Guangdong, China, this machine represents excellent value for contractors and civil engineering firms seeking dependable performance in a mid-sized excavator class.

The PC350-8 features Komatsu's advanced hydraulic system and fuel-efficient engine technology, delivering strong digging force and smooth operation across diverse job sites. With its 35-ton operating weight, this excavator handles excavation, loading, and material handling tasks efficiently.

<ul>
<li>Year of Manufacture: 2020</li>
<li>Model: PC350-8</li>
<li>Current Location: Guangdong, China</li>
<li>Condition: Used, competitively priced</li>
<li>Application: Construction, mining, infrastructure development</li>
</ul>

Contact FairTradeMachinery for detailed specifications, inspection reports, and shipping arrangements to your location.

Specifications	Value
No.	1171480
Tonnage (tons)	90
Working weight (kg)	90390
Bucket capacity (m³)	4.6
Boom length (mm)	8400
Rod length (mm)	4400
Country of origin	America
power	Traditional power
manufacturer	Joint venture/Import
bucket	backhoe
Engine type	Caterpillar C18 ACERT(ATAAC)
Rated power (kw/rpm)	390
Cooling mode	water-cooling
Cylinder diameter × stroke (mm)	145 x 171
Number of cylinders (PCS)	6
Displacement (L)	18.1
Ground specific pressure (Kpa)	88.3-122.4
Rotation speed (rpm)	5.9
Bucket digging force (kN)	363
Rod digging force (kN)	276
Maximum tractive force (kN)	590
Travel speed (km/h)	4.5
Turning torque (kN/m)	260
Main overflow set pressure (Mpa)	35
Type of walking hydraulic motor	980
Traveling Hydraulic Circuit (Mpa)	35
Rotary Hydraulic Circuit (Mpa)	35
Control Hydraulic Circuit (Mpa)	26
Pilot Oil Circuit (MPa)	4.12
Pilot pump flow (L/min)	90
Boom cylinders - Number × diameter × stroke (mm)	2-210 x 2262
Fuel Tank (L)	1240
Engine Oil changes (L)	65
Coolant (L)	101
Hydraulic System (L)	995(including fuel tank)
Total transport length (mm)	14700
Total transport width (mm)	4260
Total transport height (mm)	5290
Full cab height (mm)	3760
Minimum ground clearance (mm)	900
Back end turning radius (mm)	4680
Total track length (mm)	Standard 5840/ Extended 6360
Track gauge (mm)	3510
Track plate width (mm)	650/750/900
Total track width (mm)	4260
Maximum digging depth (mm)	9660
Maximum unloading height (mm)	9270
Maximum vertical digging depth (mm)	6850
Maximum excavation radius of stop surface (mm)	14690
Maximum effective digging depth (mm)	9550

2020 Caterpillar 390DL

Product Description

Overview

Brand Name：

Model Number：

Year：

Location：

Pub Date：

You may also like

QUICK LINKS

ABOUT US

CONTACT US