Used Drill Rigs for Sale

A drilling rig is not a single type of machine – it’s a whole family of equipment.

• Rotary rigs are for large-diameter pile foundations.

• Crawler DTH Drill Rigs are for high-pressure blasting in open-pit mines.

• Crawler Tophammer Rock Drill Rigs are for tunneling and underground drilling.

• Water well rigs are for agricultural irrigation and deep water wells.

• HDD rigs are for trenchless pipe installation under roads and rivers.

• Raise boring rigs are for vertical shafts in coal mining and hydro projects.

We stock all of these, so you’ll never be forced to buy a rotary rig when you actually need a water well drill.

Whether you are drilling blast holes in African mines, sinking deep water wells in the Middle East, or crossing roads in South American municipal projects – we have the right used rig for your job. Each machine comes with a detailed inspection report covering drilling capacity, engine condition, hydraulic system, mast wear, and real photos/videos.

We carry both Chinese domestic brands and world-class imported brands. Here is a quick comparison to help you choose:

Our inventory is updated daily. Well-maintained used drill rigs sell quickly – usually within a few weeks. Hot models like SANY SR285 and XCMG XR280D are often reserved by repeat customers even before they are listed online.

China is one of the world’s largest producers and holders of drilling equipment, with a mature remanufacturing industry. For buyers in Southeast Asia, the Middle East, Africa, and South America, sourcing from China offers clear advantages:

• Significant cost savings – A professionally remanufactured second-hand drill rig costs only 50–65% of a new machine, while delivering 80–90% of new performance. For mining and infrastructure projects where equipment depreciation matters, this directly boosts your profit margin.

• Complete category coverage – You don’t need to source rotary rigs, DTH drills, and water well rigs from different countries. We offer all major types under one roof, with unified inspection and logistics – saving you time and coordination hassles.

• Proven export expertise – We have shipped drilling equipment to more than 50 countries. We handle disassembly, container loading, customs clearance, and ocean freight to major destination ports including Djibouti, Jakarta, Jebel Ali, Santos, Callao, Lagos, and more.

We also support on-site inspection or remote video verification. If you cannot come to China, our team will inspect every point you specify – engine, hydraulic pump, drill pipe, rotary head, wire ropes – and send you a detailed condition report with photos and videos.

Option 1 – Browse & Enquire

Search our online inventory by type → drilling parameters → brand → year. Select a machine, contact us to confirm availability, and we will send you a fixed price with photos and shipping options.

Option 2 – Tell Us Your Needs

Simply share your requirements – preferred brand, drilling depth, diameter, engine preference, and budget. Our sourcing team will find matching machines from our network (including off-market sources) and provide 2–3 options within 1 working day.

For either route, we handle all subsequent steps:Negotiation → pre-shipment re-inspection → disassembly & container loading → export customs clearance → marine insurance. You just wait for your rig at the destination port.

Bulk discounts:

• 2–4 units: Free inland trucking to the Chinese port.

• 5+ units: Wholesale pricing and optimized container packing to reduce per-unit freight cost.

Our buyers include mining contractors in Africa, infrastructure companies in Saudi Arabia, drilling service providers in Brazil, and agricultural development groups in Nigeria. They come back to us because:

• The machine you see is the machine you get – no surprises.

• We deliver on time, as promised.

• After-sales support is reliable.

Every used drill rig undergoes at least 2 hours of live load testing (where conditions permit) before leaving our facility. We check hydraulic seals, drilling movements, engine fuel consumption, and structural integrity.

Global mining and infrastructure investment is heating up, driving strong demand for drilling equipment. At the same time, China’s emission standard upgrades (National IV) have pushed many well-maintained National III rigs into the second-hand market. Since 2024, China’s used drill rig exports have grown significantly, while prices remain reasonable. Early buyers can secure low-hour, well-documented machines before the best ones are absorbed. Don’t wait until the peak season – act now to lock in better value.

Our product listings are refreshed weekly. If you don’t see your desired model right now, just contact us – we may already have a matching unit in the pipeline, or we can initiate a targeted search for you.

Whether you need a used DTH drill for mining, a second-hand rotary rig for piling, a pre-owned water well drill, or a top hammer rig for tunneling – we provide fast, competitive quotes and comprehensive shipping solutions.

Email: sam@fairtrademachinery.com

WhatsApp: +86 150 6812 0848

How do I verify the actual condition of a used drilling rig? Do you support remote inspection?

Yes, we offer multiple verification methods. We provide high-resolution photos and running videos covering the engine compartment, control panel, hydraulic hoses, and other critical parts. We can also arrange live video inspection via WhatsApp or Zoom – you can watch the rig move, feed, and rotate in real time. For bulk orders, we welcome independent third-party inspection (e.g., SGS) at our warehouse. Every machine is fully function-tested before shipment to ensure reliable performance.

What is the lead time and how is shipping arranged?

After order confirmation, it typically takes 15–30 days for machine preparation, export customs clearance, and port loading. We offer FOB terms and work with experienced heavy-lift logistics partners who provide professional lashing, containerization, and cargo insurance. We can also design a full door-to-door shipping plan based on your needs.

Are the rigs reconditioned or modified? Will modifications affect performance?

We offer two options – as-is (original condition) or customized remanufacturing/refurbishment. Refurbishment may include replacing worn parts, repainting, upgrading hydraulic or electrical systems – all using OEM or equivalent-quality components, performed by certified technicians. We clearly disclose all modifications and their impact on performance, so you can choose the best fit for your budget and project.

How do I select the right rig for my job site? Can you advise on sizing?

Absolutely. When choosing, we consider: drilling depth and diameter, rock hardness (Protodyakonov coefficient), open-pit vs. underground operation, and transport restrictions. Based on your project parameters, we recommend the most suitable brand and model to avoid “over-sizing” (wasting money) or “under-sizing” (overloading the machine). For example, hard-rock open-pit mines favor Atlas Copco or Sandvik heavy-duty drills, while soft-soil water well drilling often suits KaiShan or Zhigao for better cost-effectiveness. We also offer custom modifications for special applications.

What about spare parts availability? Can you supply drill rig parts?

Yes, we not only sell used drilling rigs but also provide a long-term supply of spare parts – including drill bits, drill rods, tools, filters, hydraulic components, and more. We carry genuine OEM parts as well as high-quality alternatives. We cover all major brands – Atlas Copco, Sandvik, KaiShan, Zhigao, XCMG, etc. After delivery, you can always contact us for parts support to keep your rig running smoothly.