Product Description
Built for demanding job sites, this 2020 Komatsu PC110-7 is a compact 11-ton excavator ready to put to work immediately. Powered by the proven Komatsu SAA4D95LE-3 water-cooled diesel engine producing 65 kW at 2,200 RPM, this machine delivers consistent performance across digging, grading, trenching, and light demolition tasks. Currently located in Beijing, China, and available for prompt inspection and deployment.
- Digging Performance: Bucket digging force of 86 kN and arm digging force of 56 kN, with a maximum digging depth of 5,060 mm and maximum digging radius of 7,730 mm
- Bucket & Boom: 0.48 m³ backhoe bucket, 4,260 mm boom, and 2,260 mm arm for precise load placement and reach
- Undercarriage: 500 mm track plates, 2,490 mm total track width, and a low ground pressure of 0.37 kPa — suitable for soft or sensitive terrain
- Travel & Mobility: Dual-speed travel up to 5.5 km/h with a 70% gradeability for navigating challenging terrain
- Hydraulics: High-output main pump at 226 L/min with axial piston motors for smooth, responsive swing and travel control
- Emission Compliance: EPA/EU/Japan Level 2 certified engine — meets international regulatory standards
- Fuel Capacity: 247 L fuel tank supporting extended operational shifts without interruption
Sourced from Jining, Shandong Province — a recognized manufacturing hub for heavy equipment — this PC110-7 carries the reliability and parts availability that come with a globally supported Komatsu platform. Compact dimensions (7,170 mm transport length) make transport and site access straightforward. Ready to work from day one.
| Specifications | Value |
|---|---|
| No. | 1065655 |
| Tonnage (tons) | 11 |
| Working weight (kg) | 10980 |
| Bucket capacity (m³) | 0.48 |
| Boom length (mm) | 4260 |
| Rod length (mm) | 2260 |
| Country of origin | Jining, Shandong Province |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Komatsu SAA4D95LE-3 |
| Rated power (kw/rpm) | 65/2200 |
| Cooling mode | water-cooling |
| Cylinder diameter × stroke (mm) | 95 x 115 |
| Displacement (L) | 3.26 |
| Working form | 4 stroke, after cooling, direct injection; Comply with 2001 EPA/EU/ Japan Level 2 emission standards. |
| Ground specific pressure (Kpa) | 0.37 |
| Rotation speed (rpm) | 11 |
| Climbing ability (%) | 70/30 ° |
| Bucket digging force (kN) | 86 |
| Rod digging force (kN) | 56 |
| Travel speed (km/h) | 2.7-5.5 |
| Rotary hydraulic motor type | Axial piston motor ×1(rotary holding valve) |
| Type of walking hydraulic motor | Axial piston motor ×2(with parking brake) |
| Maximum flow of main pump (l/min) | 226L/min |
| Traveling Hydraulic Circuit (Mpa) | 355 |
| Rotary Hydraulic Circuit (Mpa) | 295 |
| Control Hydraulic Circuit (Mpa) | 325 |
| Hydraulic crushing pipeline is standard | no |
| Bucket cylinders - Number × diameter × stroke (mm) | 104 x 885 x 60 |
| Bucket rod cylinders - Number × diameter × stroke (mm) | 133 * 1005 * 75 |
| Boom cylinders - Number × diameter × stroke (mm) | 110 * 980 * 65 |
| Fuel Tank (L) | 247 |
| Hydraulic Tank (L) | 90 |
| Engine Oil changes (L) | 11 |
| Coolant (L) | 13.4 |
| Total transport length (mm) | 7170 |
| Total transport width (mm) | 2490 |
| Total transport height (mm) | 2810 |
| Full cab height (mm) | 2810 |
| Counterweight ground clearance (mm) | 855 |
| Minimum ground clearance (mm) | 400 |
| Back end turning radius (mm) | 2110 |
| Total track length (mm) | 3435 |
| Track gauge (mm) | 1990 |
| Track plate width (mm) | 500 |
| Total track width (mm) | 2490 |
| Track ground length (mm) | 2705 |
| Maximum digging radius (mm) | 7730 |
| Maximum digging depth (mm) | 5060 |
| Maximum excavation height (mm) | 7910 |
| Maximum unloading height (mm) | 5650 |
| Maximum vertical digging depth (mm) | 4570 |
| Bulldozer lift or depth (mm) | No bulldozer |
| Maximum excavation radius of stop surface (mm) | 7600 |
| Maximum effective digging depth (mm) | 4730 |
see more
WhatsApp
Facebook
FAQs
WhatsApp