










Product Description
Available from our Guangdong yard: a 2020 Komatsu PC200-8N1 tracked excavator, a single-owner unit imported in premium condition and offered exactly as it came in. The machine is clean and straight throughout — tidy cab, intact panels, and a working presentation that reflects careful ownership rather than contract-site abuse.
Key points for buyers:
- One owner from new; imported unit, not a locally rebuilt machine
- Original factory breaker piping still fitted — hammer-ready without re-plumbing
- New undercarriage: track groups and running gear recently renewed
- Condition reported as excellent, with engine, hydraulics and swing all operating as they should
- Located in Guangdong, China, and accessible for inspection before purchase
Trial operation is welcome — serious buyers are encouraged to run the machine under load at our yard before committing. Export paperwork and loading arrangements can be discussed once terms are agreed. Contact our sales desk for current walkaround photos, an inspection report and a firm quotation.
| Specifications | Value |
|---|---|
| No. | 1189304 |
| Tonnage (tons) | 20 |
| Working weight (kg) | 19500 |
| Bucket capacity (m³) | 0.8 |
| Rod length (mm) | 2900 |
| Country of origin | Japan |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Komatsu SAA6D107E-1-A |
| Rated power (kw/rpm) | 110/2000 |
| Cooling mode | water-cooling |
| Number of cylinders (PCS) | 6 |
| Displacement (L) | 6.69 |
| Working form | Direct injection |
| Ground specific pressure (Kpa) | 44.1 |
| Rotation speed (rpm) | 12.4 |
| Bucket digging force (kN) | 149 |
| Rod digging force (kN) | 108 |
| Travel speed (km/h) | 5.5/4.1/3.0 |
| Rotary hydraulic motor type | Fixed displacement axial piston motor |
| Type of walking hydraulic motor | Variable axial piston motor |
| Traveling Hydraulic Circuit (Mpa) | 37.3 |
| Working Hydraulic Circuit (Mpa) | 34.8 |
| Fuel Tank (L) | 400 |
| Hydraulic Tank (L) | 135 |
| Hydraulic System (L) | 232 |
| Total transport length (mm) | 9425 |
| Total transport width (mm) | 2800 |
| Total transport height (mm) | 3040 |
| Minimum turning radius of front working device (mm) | 3040 |
| Back end turning radius (mm) | 2750 |
| Total track length (mm) | 4070 |
| Track gauge (mm) | 2200 |
| Track plate width (mm) | 600 |
| Maximum digging radius (mm) | 9875 |
| Maximum digging depth (mm) | 6620 |
| Maximum excavation height (mm) | 10000 |
| Maximum unloading height (mm) | 1110 |
| Maximum excavation radius of stop surface (mm) | 9700 |
WhatsApp
Facebook










FAQs
WhatsApp