










Product Description
Used Komatsu PC200-8N1 crawler excavator, listed as a 2020 model, currently located in Zhejiang, China. The original Chinese listing describes an imported 200-8N1 offered at a low price above RMB 60,000, so buyers should verify machine condition, documentation, operating hours, attachments, and delivery terms before purchase.
Key listing information:
• Year: 2020
• Brand: Komatsu
• Model: PC200-8N1
• Location: Zhejiang, China
• Condition: used, subject to on-site inspection and buyer verification
• Availability: inquiry-based; confirm status prior to site visit or transport arrangement
• Intended use: earthmoving, construction, quarry support, and general excavation work
• Buyer note: the price indication is taken from the original Chinese description and is not treated as a technical specification; final quotation should be based on verified machine details, inspection results, and logistics.
| Specifications | Value |
|---|---|
| No. | 1190242 |
| Tonnage (tons) | 20 |
| Working weight (kg) | 19500 |
| Bucket capacity (m³) | 0.8 |
| Rod length (mm) | 2900 |
| Country of origin | Japan |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Komatsu SAA6D107E-1-A |
| Rated power (kw/rpm) | 110/2000 |
| Cooling mode | water-cooling |
| Number of cylinders (PCS) | 6 |
| Displacement (L) | 6.69 |
| Working form | Direct injection |
| Ground specific pressure (Kpa) | 44.1 |
| Rotation speed (rpm) | 12.4 |
| Bucket digging force (kN) | 149 |
| Rod digging force (kN) | 108 |
| Travel speed (km/h) | 5.5/4.1/3.0 |
| Rotary hydraulic motor type | Fixed displacement axial piston motor |
| Type of walking hydraulic motor | Variable axial piston motor |
| Traveling Hydraulic Circuit (Mpa) | 37.3 |
| Working Hydraulic Circuit (Mpa) | 34.8 |
| Fuel Tank (L) | 400 |
| Hydraulic Tank (L) | 135 |
| Hydraulic System (L) | 232 |
| Total transport length (mm) | 9425 |
| Total transport width (mm) | 2800 |
| Total transport height (mm) | 3040 |
| Minimum turning radius of front working device (mm) | 3040 |
| Back end turning radius (mm) | 2750 |
| Total track length (mm) | 4070 |
| Track gauge (mm) | 2200 |
| Track plate width (mm) | 600 |
| Maximum digging radius (mm) | 9875 |
| Maximum digging depth (mm) | 6620 |
| Maximum excavation height (mm) | 10000 |
| Maximum unloading height (mm) | 1110 |
| Maximum excavation radius of stop surface (mm) | 9700 |
WhatsApp
Facebook










FAQs
WhatsApp