










Product Description
This 2020 Sany 215C-9 is a used hydraulic excavator supplied from Hebei, China. The machine is described as a single-owner, earthwork-focused unit in original condition, with no history of breaker attachment use. Inspection notes indicate no visible welding repairs on the boom or arm and major assemblies free from oil leaks. The swing system is noted as tight, with no boom drop during holding checks, while the undercarriage is reported as straight. Operator notes indicate smooth combined functions and reliable starting in both cold and warm conditions. This unit is suitable for contractors seeking a used mid-size excavator for digging, grading, and site preparation. Buyers should verify hours, paperwork, and mechanical condition through an on-site inspection.
- 2020 Sany 215C-9 | Hebei, China | Single-owner earthwork use | No hammer history | No boom/arm weld repairs | Major assemblies free from oil leaks | Tight swing with no boom drop | Straight undercarriage | Smooth operation | On-site trial recommended
| Specifications | Value |
|---|---|
| No. | 1190009 |
| Tonnage (tons) | 21 |
| Working weight (kg) | 21800 |
| Bucket capacity (m³) | 0.93 (0.8~1.2) |
| Country of origin | Shanghai |
| power | Traditional power |
| manufacturer | Made in China |
| bucket | backhoe |
| Rated power (kw/rpm) | 114/2050 |
| Cooling mode | water-cooling |
| Ground specific pressure (Kpa) | 46.5 |
| Rotation speed (rpm) | 11 |
| Climbing ability (%) | 70/35 ° |
| Bucket digging force (kN) | 138 |
| Rod digging force (kN) | 103 |
| Travel speed (km/h) | 5.4/3.3 |
| Main overflow set pressure (Mpa) | 34.3 |
| Maximum flow of main pump (l/min) | 2 x 210 |
| Traveling Hydraulic Circuit (Mpa) | 34.3 |
| Rotary Hydraulic Circuit (Mpa) | 25.5 |
| Control Hydraulic Circuit (Mpa) | 3.9 |
| Hydraulic crushing pipeline is standard | no |
| Total transport length (mm) | 9680 |
| Total transport width (mm) | 2980 |
| Total transport height (mm) | 3440 |
| Full cab height (mm) | 2990 |
| Minimum ground clearance (mm) | 440 |
| Minimum turning radius of front working device (mm) | 3595 |
| Back end turning radius (mm) | 2890 |
| Onboard width (mm) | 2710 |
| Total track length (mm) | 4250 |
| Track gauge (mm) | 2380 |
| Track plate width (mm) | 600 (800/700 optional) |
| Total track width (mm) | 2980 |
| Track ground length (mm) | 3445 |
| Maximum digging radius (mm) | 9950 |
| Maximum digging depth (mm) | 6600 |
| Maximum excavation height (mm) | 9570 |
| Maximum unloading height (mm) | 6700 |
| Maximum vertical digging depth (mm) | 5800 |
| Bulldozer lift or depth (mm) | There is no |
| Dodging plate width × height (mm) | There is no |
| Maximum excavation radius of stop surface (mm) | 9885 |
WhatsApp
Facebook










FAQs
WhatsApp