Product Description
Now available from stock in Zhejiang, China: a 2023 Sany SY125C hydraulic excavator in high-specification trim. The unit is presented in excellent overall condition and carries 4,000 hours on its original working meter, stated as genuine with no indications of a reset or replacement.
- Year: 2023
- Brand: Sany
- Model: SY125C
- Configuration: high-spec build
- Meter reading: 4,000 hours, stated as genuine
- Location: Zhejiang, China
- Condition: excellent, well maintained
At this hour level the machine sits in the productive mid-life bracket, where a clean, documented unit is still well ahead of its major service intervals — making it a practical addition to a working fleet rather than a rebuild project.
Recent hours were accumulated in domestic Chinese contracting work, which typically means consistent servicing and a machine that has not sat idle. Inspection in Zhejiang is welcome, and we can supply additional photographs, walkaround footage, and cold-start video on request. Documentation, loading and container or flat-rack arrangements can be handled for overseas buyers.
End users, dealers and exporters are all welcome to enquire. Full technical specifications should be confirmed against the machine plate and operator manual at the time of inspection.
| Specifications | Value |
|---|---|
| No. | 1155132 |
| Tonnage (tons) | 12 |
| Working weight (kg) | 12450 |
| Bucket capacity (m³) | 0.22-0.7 (0.55) |
| power | Traditional power |
| manufacturer | Made in China |
| bucket | backhoe |
| Engine type | Isuzu 4JJ1-XDJAG-01-C3 |
| Rated power (kw/rpm) | 73/2000 |
| Cooling mode | water-cooling |
| Maximum torque (N.m) | 365/1600 |
| Displacement (L) | 2.999 |
| Ground specific pressure (Kpa) | 41.6 |
| Rotation speed (rpm) | 13.06 |
| Climbing ability (%) | 70 |
| Bucket digging force (kN) | 90.6 |
| Rod digging force (kN) | 57.2 |
| Travel speed (km/h) | 5.5/3.5 |
| Fuel Tank (L) | 240 |
| Hydraulic Tank (L) | 150 |
| Engine Oil changes (L) | 15 |
| Total transport length (mm) | 7280 |
| Total transport width (mm) | 2550 |
| Total transport height (mm) | 2890 |
| Full cab height (mm) | 2740 |
| Minimum ground clearance (mm) | 425 |
| Minimum turning radius of front working device (mm) | 2880 |
| Back end turning radius (mm) | 2205 |
| Onboard width (mm) | 2490 |
| Total track length (mm) | 3360 |
| Track gauge (mm) | 1990 |
| Track plate width (mm) | 500 |
| Track ground length (mm) | 2680 |
| Maximum height at minimum turning radius (mm) | 5905 |
| Number of sprockets (single side) (each) | 1 |
| Number of wheels (single side) (each) | 6 |
| Number of track plates (single side) (PCS) | 41 |
| Maximum digging radius (mm) | 7735 |
| Maximum digging depth (mm) | 5190 |
| Maximum excavation height (mm) | 7695 |
| Maximum unloading height (mm) | 5440 |
| Maximum vertical digging depth (mm) | 4720 |
WhatsApp
Facebook
FAQs
WhatsApp