





Product Description
This 2020 Sany SY245H used excavator is offered for industrial buyers seeking a proven mid-size hydraulic machine from a recognized manufacturer. The unit is located in Sichuan, China, and the original Chinese listing notes an asking price of over 160,000 CNY. Condition, operating hours, and service records are not stated, so buyers should request inspection reports, serial verification, maintenance history, and an on-site assessment before purchase. The SY245H is suited for earthmoving, site preparation, trenching, quarry handling, and general construction support where Sany excavators are commonly deployed. FairTradeMachinery recommends verifying transport terms, attachment configuration, undercarriage wear, hydraulic performance, and destination-country compliance prior to transaction. This listing is intended for international B2B procurement, resale, and project equipment sourcing.
| Specifications | Value |
|---|---|
| No. | 1191384 |
| Tonnage (tons) | 24 |
| Working weight (kg) | 25500 |
| Bucket capacity (m³) | 1.3~1.5(1.5) |
| power | Traditional power |
| manufacturer | Made in China |
| bucket | backhoe |
| Engine type | D06FRC |
| Rated power (kw/rpm) | 147/2100 |
| Cooling mode | water-cooling |
| Maximum torque (N.m) | 750/1350 |
| Number of cylinders (PCS) | 6 |
| Displacement (L) | 6.373 |
| Ground specific pressure (Kpa) | 53.2 |
| Rotation speed (rpm) | 10.6 |
| Climbing ability (%) | 70 |
| Bucket digging force (kN) | 175 |
| Rod digging force (kN) | 120 |
| Travel speed (km/h) | 5.4/3.4 |
| Fuel Tank (L) | 475 |
| Hydraulic Tank (L) | 277 |
| Engine Oil changes (L) | 29 |
| Total transport length (mm) | 10290 |
| Total transport width (mm) | 3190 |
| Total transport height (mm) | 3190 |
| Full cab height (mm) | 3255 |
| Minimum ground clearance (mm) | 470 |
| Minimum turning radius of front working device (mm) | 3800 |
| Back end turning radius (mm) | 3105 |
| Onboard width (mm) | 3045 |
| Total track length (mm) | 4445 |
| Track gauge (mm) | 2590 |
| Track plate width (mm) | 600 |
| Track ground length (mm) | 3640 |
| Maximum height at minimum turning radius (mm) | 8016 |
| Number of sprockets (single side) (each) | 2 |
| Number of wheels (single side) (each) | 9 |
| Number of track plates (single side) (PCS) | 49 |
| Maximum digging radius (mm) | 10225 |
| Maximum digging depth (mm) | 6705 |
| Maximum excavation height (mm) | 9745 |
| Maximum unloading height (mm) | 6715 |
WhatsApp
Facebook










FAQs
WhatsApp