





Product Description
Used XCMG 50GN wheel loader, year 2021, located in Guangdong, China. The source listing identifies an extended-arm configuration and describes a well-maintained unit for industrial loading, earthmoving, and yard support operations.
Operating hours: approximately 1,600 hours.
Original blade retained.
Original brake pads installed.
Original tires fitted.
Pricing reflects machine condition and original component content.
A signed purchase agreement can be provided, supporting transparent used-equipment procurement.
The machine may be suitable for site preparation and bulk material transfer. Buyers should confirm configuration compatibility with their own operational requirements. FairTradeMachinery recommends buyer-side inspection, serial-number verification, service-document review, and export-logistics confirmation before payment. This listing is intended for contractors, scrap dealers, and material-handling businesses seeking a used XCMG loader with moderate hours and documented original parts.
| Specifications | Value |
|---|---|
| No. | 1191466 |
| Engine type | WD10G220E23 |
| Rated power (kw/rpm) | 162/2000 |
| Bucket capacity (m³) | |
| Rated load (tons) | |
| Rated load (kg) | 5000 |
| Digging force (lifting force) (kN) | |
| Machine operating weight (kg) | |
| Unloading height - Unloading Angle 45°(mm) | |
| Unloading distance - Unloading Angle 45°(mm) | |
| Maximum tractive force (kN) | |
| Maximum climbing ability (°) | 30 |
| Wheelbase (mm) | 3300 |
| Wheel base (mm) | 2250 |
| Machine length (mm) | 8165 |
| Machine width (mm) | 3016 |
| Machine height (mm) | 3485 |
| Transaxle swing Angle (°) | 35 |
| Tyre specification | 23.5-25-16PR |
| Minimum turning radius of outer wheel center line | |
| Lift (s) | |
| Ternary sum (s) | |
| Speed 1 gear (km/h) | |
| Speed 2 (km/h) | |
| Maximum speed (km/h) | 38 |
WhatsApp
Facebook










FAQs
WhatsApp