Product Description
Operators benefit from refined controls and proven stability in this 2016 XCMG XCT20L5 truck crane, currently located in Jiangsu Suqian. Built for precision lifting tasks, this 20-ton capacity unit delivers responsive handling through its hydraulic proportional control system, allowing smooth load transitions across varied jobsite conditions.
- Spacious cabin with ergonomic console layout reduces operator fatigue during extended shifts
- Enhanced outrigger stability system provides secure footing on uneven terrain
- Wide-angle visibility from elevated operator position improves load monitoring and site awareness
- Intuitive control interface minimizes learning curve for experienced crane operators
- Reliable XCMG engineering with straightforward maintenance access points
Designed for contractors prioritizing operator comfort and lifting precision, this model combines practical reach capabilities with the stability required for urban construction and infrastructure projects. Available for immediate inspection in Suqian, ready to support your lifting operations.
| Specifications | Value |
|---|---|
| No. | 1011498 |
| Tonnage (tons) | 20 |
| Working weight (kg) | 21500 |
| Bucket capacity (m³) | 1.0-1.2 |
| Boom length (mm) | 5680 |
| Rod length (mm) | 2910 |
| power | Traditional power |
| manufacturer | Made in China |
| bucket | backhoe |
| Engine type | QSB7 |
| Rated power (kw/rpm) | 135/2050 |
| Cooling mode | water-cooling |
| Number of cylinders (PCS) | 6 |
| Displacement (L) | 6.7 |
| Working form | Direct injection, 4-stroke, turbocharged, air-to-air cold |
| Ground specific pressure (Kpa) | 47.5 |
| Rotation speed (rpm) | 12 |
| Climbing ability (%) | 35 |
| Bucket digging force (kN) | 157 |
| Rod digging force (kN) | 116 |
| Maximum tractive force (kN) | 184 |
| Travel speed (km/h) | 5.7/3.1 |
| Fuel Tank (L) | 400 |
| Hydraulic Tank (L) | 220 |
| Engine Oil changes (L) | 24 |
| Total transport length (mm) | 9630 |
| Total transport width (mm) | 2910 |
| Total transport height (mm) | 3100 |
| Counterweight ground clearance (mm) | 1050 |
| Minimum ground clearance (mm) | 486 |
| Minimum turning radius of front working device (mm) | 3530 |
| Back end turning radius (mm) | 2890 |
| Total track length (mm) | 4155 |
| Track gauge (mm) | 2290 |
| Total track width (mm) | 600 |
| Maximum digging radius (mm) | 9760 |
| Maximum digging depth (mm) | 6660 |
| Maximum excavation height (mm) | 9540 |
| Maximum unloading height (mm) | 6780 |
| Maximum vertical digging depth (mm) | 6480 |
see more
WhatsApp
Facebook
