1/1
Product Description
Built for precision lifting where compact reach matters, the XCMG XCT8 delivers a rated 8-ton capacity with a truck-mounted design engineered for fast deployment across urban construction, infrastructure, and industrial worksites. This 2019 unit — sourced directly from Tianjin, China — represents a financially sound acquisition for operators who demand reliable performance without absorbing new-equipment depreciation.
- Year: 2019 — low operational age with substantial remaining service life
- Rated Lifting Capacity: 8 tons with full telescopic boom extension
- Manufacturer: XCMG — one of the world's top-ranked heavy equipment producers
- Location: Tianjin, China — strategically positioned for efficient international export
- Hydraulic outriggers for rapid, stable setup on varied ground conditions
- Compact footprint suited for congested job sites where larger cranes cannot operate
Priced significantly below new-unit market value, this XCT8 gives fleet operators and independent contractors the same core lifting capability — at a fraction of the capital outlay. Smart procurement starts here.
| Specifications | Value |
|---|---|
| No. | 1061849 |
| Tonnage (tons) | 2 |
| Working weight (kg) | 1780 |
| Bucket capacity (m³) | 0.044 |
| Boom length (mm) | 1690 |
| Rod length (mm) | 1100 |
| Country of origin | Xuzhou |
| power | Traditional power |
| manufacturer | Made in China |
| bucket | backhoe |
| Engine type | Yanmar Yanmar 3TNV82A |
| Rated power (kw/rpm) | 16.5/2200 |
| Cooling mode | water-cooling |
| Number of cylinders (PCS) | 3 |
| Displacement (L) | 1.33 |
| Ground specific pressure (Kpa) | 25.3 |
| Rotation speed (rpm) | 11 |
| Climbing ability (%) | 30 ° |
| Bucket digging force (kN) | 13.9 |
| Rod digging force (kN) | 8.8 |
| Travel speed (km/h) | 4.4/2.4 |
| Main overflow set pressure (Mpa) | 24 |
| Rotary hydraulic motor type | Plunger hydraulic motor |
| Type of walking hydraulic motor | Plunger hydraulic motor |
| Maximum flow of main pump (l/min) | 2*19.8+14.1 |
| Traveling Hydraulic Circuit (Mpa) | 21 |
| Rotary Hydraulic Circuit (Mpa) | 18 |
| Hydraulic crushing pipeline is standard | is |
| Main pump type | Japan non Fukoshi variable pump ×2+ gear pump ×1 |
| Pilot Oil Circuit (MPa) | 3.3 |
| Fuel Tank (L) | 20 |
| Hydraulic Tank (L) | 29 |
| Engine Oil changes (L) | 5.5 |
| Total transport length (mm) | 3760 |
| Total transport width (mm) | 1300 |
| Total transport height (mm) | 2405 |
| Counterweight ground clearance (mm) | 509 |
| Minimum ground clearance (mm) | 180 |
| Minimum turning radius of front working device (mm) | 1675 |
| Back end turning radius (mm) | 1190 |
| Track gauge (mm) | 1070 |
| Track plate width (mm) | 230 |
| Track ground length (mm) | 1217 |
| Maximum digging radius (mm) | 3915 |
| Maximum digging depth (mm) | 2285 |
| Maximum excavation height (mm) | 2655 |
| Maximum unloading height (mm) | 2515 |
| Maximum vertical digging depth (mm) | 1485 |
| Dodging plate width × height (mm) | 1300 x 235 |
see more
WhatsApp
Facebook
FAQs
WhatsApp