






Product Description
This used Sany STC250 lifting machine, built in March 2020, is offered from Henan, China. The equipment features a 4-section main boom and a China V emission standard engine configuration, making it suitable for general construction, industrial maintenance, and lifting support work. The seller reports very good overall condition and notes that no hired driver was used, which may simplify pre-purchase inspection and handover.
- Brand: Sany. Model: STC250. Year: 2020. Boom: 4-section main boom. Emission: China V. Location: Henan, China. Condition: reported very good.
Buyers should verify boom, hydraulic, safety, and control systems through an on-site inspection, review available maintenance records, and confirm local registration or transfer requirements before final purchase.
| Specifications | Value |
|---|---|
| No. | 1192231 |
| Tonnage (tons) | 125 |
| Working weight (kg) | 125000 |
| Bucket capacity (m³) | 7.0~9.0 |
| power | Traditional power |
| manufacturer | Made in China |
| bucket | backhoe |
| Rated power (kw/rpm) | 567/1800 |
| Ground specific pressure (Kpa) | 150 |
| Rotation speed (rpm) | 5.5 |
| Climbing ability (%) | 70 |
| Bucket digging force (kN) | 585 |
| Rod digging force (kN) | 460 |
| Travel speed (km/h) | 3.5/2.4 |
| Total transport length (mm) | 14710 |
| Total transport width (mm) | 5560 |
| Total transport height (mm) | 6260 |
| Full cab height (mm) | 4375 |
| Minimum ground clearance (mm) | 1085 |
| Minimum turning radius of front working device (mm) | 6550 |
| Back end turning radius (mm) | 4950 |
| Onboard width (mm) | 3500 |
| Total track length (mm) | 6630 |
| Track gauge (mm) | 3900 |
| Track plate width (mm) | 700 |
| Track ground length (mm) | 5150 |
| Maximum height at minimum turning radius (mm) | 10950 |
| Maximum digging radius (mm) | 13335 |
| Maximum digging depth (mm) | 8065 |
| Maximum excavation height (mm) | 12550 |
| Maximum unloading height (mm) | 7945 |
| Maximum vertical digging depth (mm) | 5085 |
WhatsApp
Facebook









FAQs
WhatsApp