










Product Description
Used Sany SY215C-8 excavator, model year 2020, currently located in Peking, China. This machine is offered as a well-maintained working unit from a completed site project and is ready for immediate deployment on active construction, earthmoving, or quarry duty.
- Reported condition: near-new operational state with careful owner maintenance. Major components are stated to be untouched, with no indication of rebuild or replacement. Site-completed history supports practical reliability for buyers seeking a dependable used excavator. Suitable for contractors requiring a ready-to-work machine without extended refurbishment.
FairTradeMachinery positions this Sany SY215C-8 for buyers prioritizing proven condition and prompt project readiness rather than bargain-level repairs. The original listing emphasizes owner maintenance and direct site use. Inspect documentation, verify operating hours, and perform standard pre-purchase checks before bidding.
| Specifications | Value |
|---|---|
| No. | 1190734 |
| Tonnage (tons) | 21 |
| Working weight (kg) | 20900 |
| Bucket capacity (m³) | 0.93 |
| Country of origin | Kunshan in Jiangsu Province |
| power | Traditional power |
| manufacturer | Made in China |
| bucket | backhoe |
| Engine type | Mitsubishi 6D34-TL |
| Rated power (kw/rpm) | 114/2050 |
| Cooling mode | water-cooling |
| Ground specific pressure (Kpa) | 45 |
| Rotation speed (rpm) | 12.5 |
| Climbing ability (%) | 70/35 ° |
| Bucket digging force (kN) | 138 |
| Travel speed (km/h) | 3.2/5.5 |
| Main overflow set pressure (Mpa) | 34.3 |
| Maximum flow of main pump (l/min) | 2 x 210 |
| Traveling Hydraulic Circuit (Mpa) | 34.3 |
| Rotary Hydraulic Circuit (Mpa) | 25.5 |
| Control Hydraulic Circuit (Mpa) | 3.9 |
| Hydraulic crushing pipeline is standard | no |
| Total transport length (mm) | 9397 |
| Total transport width (mm) | 2980 |
| Total transport height (mm) | 2956 |
| Full cab height (mm) | 2930 |
| Minimum ground clearance (mm) | 440 |
| Back end turning radius (mm) | 2750 |
| Total track length (mm) | 4250 |
| Track gauge (mm) | 2380 |
| Track plate width (mm) | 600 |
| Total track width (mm) | 2980 |
| Track ground length (mm) | 3445 |
| Maximum digging radius (mm) | 9885 |
| Maximum digging depth (mm) | 6630 |
| Maximum excavation height (mm) | 9305 |
| Maximum unloading height (mm) | 6475 |
| Maximum vertical digging depth (mm) | 5980 |
| Bulldozer lift or depth (mm) | There is no |
see more
WhatsApp
Facebook










FAQs
WhatsApp