




Product Description
This is a used Sany SY365C-8 heavy machine, listed as a 2013 model located in Guangdong, China. It is offered as a cost-effective option for contractors, quarries, demolition firms, and infrastructure projects that require established large-class excavator capability without the premium of a newer unit. The original listing notes a 24 m long arm, a configuration that can extend working reach for trenching, dredging, slope trimming, and material handling where standard arm geometry may be limited. Buyers should verify the exact model designation, machine condition, operating hours, maintenance history, undercarriage wear, hydraulic and engine performance, available attachments, and transport requirements before purchase. FairTradeMachinery recommends confirming export documentation, local compliance, and inspection records in Guangdong, China. This description is based on the provided listing information and does not guarantee undisclosed specifications, condition, or performance.
| Specifications | Value |
|---|---|
| No. | 1189990 |
| Tonnage (tons) | 36 |
| Working weight (kg) | 34100 |
| Bucket capacity (m³) | 1.6 |
| Country of origin | Kunshan in Jiangsu Province |
| power | Traditional power |
| manufacturer | Made in China |
| bucket | backhoe |
| Engine type | Isuzu |
| Rated power (kw/rpm) | 190.5/2000 |
| Ground specific pressure (Kpa) | 59.9 |
| Rotation speed (rpm) | 9.5 |
| Climbing ability (%) | 70/35 ° |
| Bucket digging force (kN) | 220 |
| Rod digging force (kN) | 180 |
| Travel speed (km/h) | 5.5/3.5 |
| Total transport length (mm) | 11015 |
| Total transport width (mm) | 3190 |
| Total transport height (mm) | 3315 |
| Full cab height (mm) | 3025 |
| Minimum ground clearance (mm) | 550 |
| Minimum turning radius of front working device (mm) | 4370 |
| Back end turning radius (mm) | 3300 |
| Total track length (mm) | 5050 |
| Track gauge (mm) | 2590 |
| Track plate width (mm) | 600 |
| Total track width (mm) | 3190 |
| Track ground length (mm) | 4140 |
| Maximum digging radius (mm) | 10615 |
| Maximum digging depth (mm) | 7040 |
| Maximum excavation height (mm) | 9810 |
| Maximum unloading height (mm) | 7140 |
| Maximum vertical digging depth (mm) | 6280 |
| Bulldozer lift or depth (mm) | There is no |
| Dodging plate width × height (mm) | There is no |
WhatsApp
Facebook










FAQs
WhatsApp